![25600-spit-pulsa-nails.jpg](https://www.protrade.co.uk/wp-content/uploads/25600-spit-pulsa-nails.jpg)
![25600-spit-pulsa-nails-2.jpg](https://www.protrade.co.uk/wp-content/uploads/25600-spit-pulsa-nails-2.jpg)
![25600-spit-pulsa-nails-3.jpg](https://www.protrade.co.uk/wp-content/uploads/25600-spit-pulsa-nails-3.jpg)
Spit HC6 Pulsa Nail & Fuel Packs for Concrete & Steel
Klarna 0% finance available on orders over £99 inc. vat
Product Overview
Manufacturer: Spit
-
HC6 high performance Pulsa pins with gas, for fixing in to steel, hard and pre-stressed concrete. For use with the Pulsa 800P+, 800E, 40P+ and 40E gas nailing machines.
Read more
Features:
The Pulsa System of Tool, Gas and Nail meets the EN792-13 European Safety Standard.
Used in the drylining, fire protection, concrete flooring, mechanical and electrical trades.
Collation stays intact when fixed to form a plastic washer.
HC6 nails are designed for use in steel and concrete with a density of up to and greater than C25 strength.
The 40mm nail is a flush head, leaving no plastic washer, and C6 type for concrete with a density of C25 strength or less (HC6 nails not available in 40mm length).
Other lengths of C6 standard pins are available to order, but HC6 is recommended where possible, due to higher performance and greater strength.
10 strip nail collation; suitable for 20 and 50 magazine tools.
Box Quantity: 500 nails plus one fuel cell.
All Pulsa nails are CE marked.
Genuine ITW Spit branded product from an authorised partner: 057540, 057541, 05742, 057543, 057544, 057550, 057551, 057552, 057553, 057554
Pin Selection Guide:
Fixture Thickness
5mm
10mm
15mm
20mm
27mm
Steel
HC6 15mm
HC6 17mm
HC6 22mm
HC6 27mm
HC6 32mm
Hard Concrete
HC6 17mm
HC6 22mm
HC6 27mm
HC6 32mm
n/a
Concrete & Brick
HC6 22mm
HC6 22/27mm
HC6 27/32mm
HC6 32mm
C6FH 40mm
Min. Fixture Thickness: 5mm